Arial
Wingdings
Monotype Sorts
Symbol
Arial erif
Times New Roman
Helvetica ingbats ic Demi
Helvetica-Narrow
Swis721 Cn BT
y,DrvConvert
Display
Over-circle for emphasizing start of Sequence
scratch.b1 Start circle `8Set Start circle to larger diameter for number in centre
scratch.b1 Start blob `1Set Start circle to 5mm diameter for number above
_Fill blob yellow ` Make the large outer ring yellow FillPattern
Make blob transparent `-Make the large outer ring transparent (white) FillPattern
Angle _Cross-box start 1 `$Set start on Cross-Box line 30° Down
Angle `"Set start on Cross-Box line 30 Cross-box start 2
Angle Main Axis start Set start to main axis
K Factor
Catalog No Fig 1
Any Figure from Fam. 1.6... Choose with right mouse button
`*Alan Cassidy, Freestyle Aviation, UK; 2001
`%Move start circle to desired position
Extend as required
`"Move end lines to desired position
scratch.c3 Fig 1.6.1 `#Make figure to Catalog number 1.6.1
scratch.c3 `#Make figure to Catalog number 1.6.2 Fig 1.6.2
scratch.c3 `#Make figure to Catalog number 1.6.3 Fig 1.6.3
scratch.c3 `#Make figure to Catalog number 1.6.4 Fig 1.6.4
scratch.a3 _Start circle `9Set Start circle to larger diameter with number in centre
scratch.a3 Start blob `2Set Start circle to 2mm diameter with number above
K Factor K Factor
Catalog No. CIVA Catalogue number
1.6.1
Any Loop from Fam. 7.5... Choose with right mouse button
Move upwards to enlarge radius
scratch.c3 Fig 7.5.1 `#Make figure to Catalog number 7.5.1
scratch.c3 `#Make figure to Catalog number 7.5.2 Fig 7.5.2
scratch.c3 `#Make figure to Catalog number 7.5.3 Fig 7.5.3
scratch.c3 `#Make figure to Catalog number 7.5.4 Fig 7.5.4
scratch.y1 _Start circle `9Set Start circle to larger diameter with number in centre
scratch.y1 Start blob `2Set Start circle to 2mm diameter with number above
scratch.c2 _Make Cross-Box Start (1) `(Set on Cross-Box, start line angled down
scratch.c2 Make Cross-Box Start (2) `&Set on Cross-Box, start line angled up
scratch.c2 Make Main Axis Start Set on main axis
scratch.d3 _Toggle roll delimiters `=Show or Hide lines delimiting rolling elements in top of loop
7.5.1
@&FV^bd
pwwp
Any 180
turn, upright or inverted.
ous rolls.
Extend indefinitely
scratch.c2 Fig 2.2.1 Upright turn Upright 270° turn
scratch.c2 Fig 2.2.2 Inverted turn Inverted 270° turn
scratch.a2 _Start circle `9Set start circle to larger diameter with number in centre
scratch.a2 Start blob `2Set start circle to 2mm diameter with number above
scratch.d1 _Rotate 30° Clockwise `0Set start on Cross-Box by rotating 30° Clockwise
scratch.d1 Rotate 30° Anti-Clockwise `5Set start on Cross-Box by rotating 30° Anti-Clockwise
scratch.d2 _Show '180' turn text `&Show text giving angle of turn degrees
scratch.d2 Hide '180' turn text `&Hide text giving angle of turn degrees
Scratch.A1 _Show Text Block Highlighting `*Give yellow background to text annotations
Scratch.A1 Hide Text Block Highlighting `.Remove yellow background from text annotations
Catalog No. CIVA Catalog number
2.2.1
Any Figure from Fam. 1.1... Choose with right mouse button.
`)Alan Cassidy, Freestyle Aviation,UK; 2001
Move roll point
Move end point
scratch.c2 Fig 1.1.1 `#Make figure to Catalog number 1.1.1
Fig 1.1.2 `#Make figure to Catalog number 1.1.2 scratch.c2
Fig 1.1.3 `#Make figure to Catalog number 1.1.3 scratch.c2
Fig 1.1.4 `#Make figure to Catalog number 1.1.4 scratch.c2
Angle rNFc _Line on cross-box axis 1 Rotate line to B-axis and down
Angle rNFc Line on cross-box axis 2 Rotate line to B-axis and up
Angle Line on main axis Rotate line to A-axis
_Start circle `9Set Start circle to larger diameter with number in centre scratch.a1
Start blob `2Set Start circle to 2mm diameter with number above scratch.a1
1.1.1
Any 90
turn, with B-Axis at 30
orientation
-Axis at 30
ation
scratch.c2 Fig 2.2.3 Erect turn
scratch.c2 Fig 2.2.4 Inverted turn
scratch.a2 _Start circle `6Set start circle to larger diameter with number inside
scratch.a2 Start blob `3Set start circle to 2mm diameter with number beside
scratch.c1 _Make cross-box (B-Axis) Start `)Rotates figure to start on secondary axis
scratch.c1 Make main axis (A-Axis) Start `'Rotates figure to start on primary axis
scratch.d2 _Show '90' turn text `&Show text giving angle of turn degrees
scratch.d2 Hide '90' turn text `&Hide text giving angle of turn degrees
2.2.3
One turn spin, any type
scratch.a2 Make Spin Positive
scratch.a2 Make Spin Negative
scratch.a1 _Spin with Upright Entry `$Spin entered from level upright line
scratch.a1 Spin with Inverted Entry `%Spin entered from level inverted line
Catalog No. CIVA Catalog Number
Spin Type Spin Positive or Negative Positive Negative
Entry Type Entry Type (Upright/Inverted) Upright Entry Inverted Entry
9.11.1.4
9.12.2.4
Positive
Upright Entry
9.10.1.4
9.10.3.4
Same Entry
Roll without hesitations
itations
Angle `Q(-DTû Rotate 45° Clockwise Rotate 45° Clockwise
Angle `Q(-DTû Rotate 45° Anti-Clockwise Rotate 45° Anti-Clockwise
Angle rNFc _Rotate 30° Clockwise `-Use for cross-box (B-Axis) level or 45° lines
Angle rNFc Rotate 30° Anti-Clockwise `-Use for cross-box (B-Axis) level or 45° lines
9.1.3.4
9.1.1.4
Lines to delineate last figure in sequence
Change spacing between lines
angle Q(-DTû Finish Cross-Box Rotate to show end on B-Axis
angle Finish on Main Axis Rotate to show end on A-Axis
End Lines
wwpw
Quarter Clover started cross-box
d, B-axis at 30
to horizontal.
Move vertically as required
Extend horizontally as required
scratch.b2 Width Controls.x2 Width/2 controls.x3 width*0.5 Finish reverse direction
scratch.b2 Width Controls.x2 Width*1.25 Controls.x3 Width*1.25 Finish original direction
_Start circle scratch.a2
scratch.a2 Start blob
scratch.c3 Fig 7.5.1
scratch.c3 Fig 7.5.2
scratch.c3 Fig 7.5.3
scratch.c3 Fig 7.5.4
scratch.y1 _Start circle
scratch.y1 Start blob
scratch.c2 _Rotate 30° Clockwise
scratch.c2 Rotate 30° Anti-Clockwise
scratch.d3 _Show roll delimiters
scratch.d3 Hide roll delimiters
Any Figure from Fam. 5.1... Choose with right mouse button
Position start of vertical up
Position end of vertical down
scratch.c3 Controls.x4 width*-0.5 Fig 5.1.1
scratch.c3 Controls.x4 width*-0.5 Fig 5.1.2
scratch.c3 Controls.x4 width*1.5 Fig 5.1.3
scratch.c3 Controls.x4 width*1.5 Fig 5.1.4
scratch.a2 _Start circle
5.1.1
Any Figure from Fam. 8.42... Choose with right mouse button.
` CUUUUU `%Move start circle to desired position
Change roll point
` CUUUUU `"Move end lines to desired position
scratch.c3 Fig 8.42.1
scratch.c3 Fig 8.42.2
scratch.c3 Fig 8.42.3
scratch.c3 Fig 8.42.4
scratch.a3 _Start circle
scratch.a3 Start blob
8.42.1
Half roll vertical, level or 45
Angle `Q(-DTû Rotate 45° Clockwise
Angle `Q(-DTû Rotate 45° Anti-Clockwise
Angle rNFc _Rotate 30° Clockwise
Angle rNFc Rotate 30° Anti-Clockwise
9.1.1.2
9.1.3.2
9.4.1.2
9.4.3.2
Any Figure from Fam. 7.2... Choose with right mouse button
Move sideways to enlarge radius
scratch.c3 Fig 7.2.1
scratch.c3 Fig 7.2.2
scratch.c3 Fig 7.2.3
scratch.c3 Fig 7.2.4
7.2.1
scratch.c3 Fig 1.6.1
scratch.c3 Fig 1.6.2
scratch.c3 Fig 1.6.3
scratch.c3 Fig 1.6.4
One-and-a-Quarter turn spin, any type
scratch.a3 Show Text Highlighting
Hide Text Highlighting scratch.a3
9.11.1.5
9.12.2.5
Any Figure from Fam. 7.20... Choose with right mouse button.
`"Position to show start of 45° line
` Position to show end of 45° line
scratch.c3 Fig 7.20.1
scratch.c3 Fig 7.20.2
scratch.c3 Fig 7.20.3
scratch.c3 Fig 7.20.4
7.20.1
pwpww
Any Figure from Fam. 7.3... Choose with right mouse button
scratch.c3 Fig 7.3.1
scratch.c3 Fig 7.3.2
scratch.c3 Fig 7.3.3
scratch.c3 Fig 7.3.4
7.3.1
Any Figure from Fam. 1.14... Choose with right mouse button
scratch.c3 Fig 1.14.1
scratch.c3 Fig 1.14.2
scratch.c3 Fig 1.14.3
scratch.c3 Fig 1.14.4
1.14.1
scratch.c2 Fig 1.1.1
Fig 1.1.2 scratch.c2
Fig 1.1.3 scratch.c2
Fig 1.1.4 scratch.c2
Angle rNFc _Line on cross-box axis 1
Angle rNFc Line on cross-box axis 2
Angle Line on main axis
_Start circle scratch.a1
Start blob scratch.a1
scratch.b1 Start circle
scratch.b1 Start blob
_Fill blob yellow FillPattern
Make blob transparent FillPattern
Angle _Cross-box start 1
Angle Cross-box start 2
Angle Main Axis start
Connect End and Start of Figures on different levels
Dotted Line
scratch.c2 Fig 2.2.3
scratch.c2 Fig 2.2.4
scratch.c1 _Make cross-box (B-Axis) Start
scratch.c1 Make main axis (A-Axis) Start
scratch.d2 _Show '90' turn text
scratch.d2 Hide '90' turn text
Scratch.A1 _Show Text Block Highlighting
Scratch.A1 Hide Text Block Highlighting
Any Figure from Fam. 1.2... Choose with right mouse button
scratch.c3 Fig 1.2.1
scratch.c3 Fig 1.2.2
scratch.c3 Fig 1.2.3
scratch.c3 Fig 1.2.4
1.2.1
9.11.1.6
9.12.2.6
wpww
Any Figure from Fam. 1.18... Choose with right mouse button
scratch.c3 Fig 1.18.1
scratch.c3 Fig 1.18.2
scratch.c3 Fig 1.18.3
scratch.c3 Fig 1.18.4
1.18.1
2 of 4 roll vertical, level or 45
Position '2/4' Text
Position '4' Text
Scratch.A2 _Show Text Block Highlighting
Scratch.A2 Hide Text Block Highlighting
K Factor `Q(-DT
Quarter roll vertical, level or 45
Position '1/4' Text
9.1.1.1
9.1.3.1
Any Figure from Fam. 1.7... Choose with right mouse button
scratch.c3 Fig 1.7.1
scratch.c3 Fig 1.7.2
scratch.c3 Fig 1.7.3
scratch.c3 Fig 1.7.4
1.7.1
Any Figure from Fam. 8.38... Choose with right mouse button.
`$Move end lines and/or enlarge radius
scratch.c3 Fig 8.38.1
scratch.c3 Fig 8.38.2
scratch.c3 Fig 8.38.3
scratch.c3 Fig 8.38.4
8.38.1
Snap roll (positive or negative)
ative)
positive line
scratch.a2 _Make Snap Negative
scratch.a2 Make Snap Positive
scratch.a5 _Snap on Positive Line
scratch.a5 Snap on Negative Line
Scratch.a4 scratch.a4 _Increase apex angle
Scratch.a4 scratch.a4 Decrease apex angle
Line Type Line Type (Pos/Neg) Positive Line Negative Line
Apex Angle Apex Angle
9.9.1.4
9.9.3.4
9.10.6.4
9.10.8.4
9.9.6.4
9.9.8.4
Positive Line
h or without hesitations
9.1.1.6
9.1.3.6
9.1.1.5
9.1.3.5
2-point Roll
without hesitations
Move text
9.2.3.4
9.2.1.4
Any Figure from Fam. 7.1... Choose with right mouse button
scratch.c3 Fig 7.1.1
scratch.c3 Fig 7.1.2
scratch.c3 Fig 7.1.3
scratch.c3 Fig 7.1.4
7.1.1
rolling turn, 3 rolls IN or OUT, B-axis at 30
scratch.c2 Fig 2.8.1
scratch.c2 Fig 2.8.2
scratch.c2 Fig 2.8.3
scratch.c2 Fig 2.8.4
2.8.1
Any Figure from Fam. 7.19... Choose with right mouse button.
scratch.c3 Fig 7.19.1
scratch.c3 Fig 7.19.2
scratch.c3 Fig 7.19.3
scratch.c3 Fig 7.19.4
7.19.1
4-point Roll
Hide Text Block Highlighting Scratch.A2
9.4.3.4
9.4.1.4
Any Figure from Fam. 8.40... Choose with right mouse button
` XUUUUU `%Move start circle to desired position
` UUUUUU `'Move horizontally to position end lines
scratch.c3 Fig 8.40.1
scratch.c3 Fig 8.40.2
scratch.c3 Fig 8.40.3
scratch.c3 Fig 8.40.4
Scratch.C4 _Finish on B-Axis (1)
Scratch.C4 Finish on B-Axis (2)
Scratch.C4 Finish on A-Axis
scratch.a4 _Toggle Roll Delimiters
8.40.1
snap roll (positive or negative)
on a positive line
Decrease apex angle Scratch.a4 scratch.a4
9.9.1.6
9.9.3.6
9.10.6.6
9.10.8.6
9.9.6.6
9.10.1.6
9.9.8.6
9.10.3.6
Any Figure from Fam. 1.19... Choose with right mouse button
scratch.c3 Fig 1.19.1
scratch.c3 Fig 1.19.2
scratch.c3 Fig 1.19.3
scratch.c3 Fig 1.19.4
1.19.1
1/2 snap roll (positive or negative)
9.9.1.2
9.9.3.2
9.10.6.2
9.10.8.2
9.9.6.2
9.10.1.2
9.9.8.2
9.10.3.2
Three-quarter roll vertical, level or 45
9.1.1.3
9.1.3.3
Any Figure from Fam. 1.16... Choose with right mouse button
scratch.c3 Fig 1.16.1
scratch.c3 Fig 1.16.2
scratch.c3 Fig 1.16.3
scratch.c3 Fig 1.16.4
1.16.1
rolling turn with 1
continuous rolls.
scratch.c2 Fig 2.17.1
scratch.c2 Fig 2.17.2
scratch.c2 Fig 2.17.3
scratch.c2 Fig 2.17.4
scratch.d1 _Rotate 30° Clockwise
scratch.d1 Rotate 30° Anti-Clockwise
2.17.1
1 1/4 snap roll (positive or negative)
a positive line
Move text position
_Increase apex angle Scratch.a4 scratch.a4
9.9.1.5
9.9.3.5
9.10.6.5
9.10.8.5
9.9.6.5
9.10.1.5
9.9.8.5
9.10.3.5
3 of 4 roll vertical, level or 45
Position '3/4' Text
9.4.1.3
9.4.3.3
2-point rolls
t hesitations
r without hesitations
9.2.1.6
9.2.3.6
Any Figure from Fam. 1.12... Choose with right mouse button
Fixed point
scratch.c3 Fig 1.12.1
scratch.c3 Fig 1.12.2
scratch.c3 Fig 1.12.3
scratch.c3 Fig 1.12.4
1.12.1
Any Figure from Fam. 6.2... Choose with right mouse button
` TUUUUU `%Move start circle to desired position
` TUUUUU Position start of vertical up
scratch.c3 controls.x1 width*0 controls.x4 width*1.25 Fig 6.2.1
scratch.c3 controls.x1 width*-0.25 controls.x4 width*0.75 Fig 6.2.2
scratch.c3 controls.x1 width*0 controls.x4 width*0 Fig 6.2.3
scratch.c3 controls.x1 width*-0.25 controls.x4 width*0.75 Fig 6.2.4
6.2.1
Any Banana from Fam. 8.13... Choose with right mouse button
` ffffff Move to set height
` SUUUUU `"Move end lines to desired position
scratch.c3 Fig 8.13.1
scratch.c3 Fig 8.13.2
scratch.c3 Fig 8.13.3
scratch.c3 Fig 8.13.4
8.13.1
3/4 snap roll (positive or negative)
Move to position text
9.9.1.3
9.9.3.3
9.10.6.3
9.10.8.3
9.9.6.3
9.10.1.3
9.9.8.3
9.10.3.3
VUUUU
Logo
1.6.3
Other
?VUUUU
@PChÒ Ñ?@PCh
@PChÒ @PCh
9.1.4.2
9.1.2.2
7.3.3
8.38.4
1.2.3
2.2.4
9.1.2.4
9.4.4.2
9.10.9.4
9.9.4.4
9.9.9.4
9.10.4.4
8.40.3
2.8.3
` KUUUUU
1.1.4
` cfffff
9.4.2.4
9.2.2.4
` pfffffö ` Xfffff
9.1.5.1
9.10.9.2
9.9.4.2
9.9.9.2
9.10.4.2
1.16.4
9.10.10.4
9.9.5.4
9.9.10.4
9.10.5.4
` kfffff
2.17.4
` TUUUUU
` zfffff
` pfffff
9.4.5.3
9.1.5.3
9.9.2.5
9.10.7.5
9.9.7.5
9.10.2.5
9.1.2.3
9.1.5.2
` ?fffff
9.10.4.3
Negative Line
9.9.4.3
9.10.9.3
9.9.9.3
9.1.4.3
9.10.10.2
9.9.5.2
9.9.10.2
9.10.5.2
@$FV^bd
` CUUUUU
` `fffff
` bfffff
fffff
` fUUUUU
` eUUUUU
` YUUUUU
<grL?
?@Vfffff Í?@Vfffff
?@Vfffff¶?@ËÌÌÌÌÌà?@Vfffff
` uwwwww
vN`^M
Guide
TheDoc
Name
Gesture Format
Helv 12pt Mid Right
Helv 10pt Mid Left
Black small dash
White solid
Blue fill
Blue dark fill
Hairline
White fill
Black 3pxl line
Figures
Wind
Primary
Sportsman
IAC Logo
Contest
Form
Level
Program
Date
Black 5pxl line
Fig 1
K_factor
Catalog_No
Dashed
Solid
Delimiters
Ghost Line
SpinType
Entry
Last Fig
Basic 1
Basic 2
Basic 3
Basic 4
Basic 5
Intermediate
Advanced
Unlimited
SportsmanA
PrimaryA
Helv 8pt centre
Helv 8pt top left
Helv 10pt Top Left
Helv-Nar 10pt Top Left
Helv 12pt Mid Left
Black 9pxl line
Black short dashed line
Helv 8pt Top Right
Harmony
TotalFigK
Framing
TotalK
judgenumber
Page-7
flightnumber.158
Fig 1 K
Fig 2 K
Fig 3 K
Fig 4 K
Fig 5 K
Fig 6 K
Fig 7 K
Fig 8 K
Fig 9 K
Fig 10 K
Fig 11 K
Fig 12 K
Fig 1 Cat
Fig 2 Cat
Fig 3 Cat
Fig 4 Cat
Fig 5 Cat
Fig 6 Cat
Fig 7 Cat
Fig 8 Cat
Fig 9 Cat
Fig 10 Cat
Fig 11 Cat
Fig 12 Cat
Fig 1 Ks
Fig 2 Ks
Fig 3 Ks
Fig 4 Ks
Fig 5 Ks
Fig 6 Ks
Fig 7 Ks
Fig 8 Ks
Fig 9 Ks
Fig 10 Ks
Fig 11 Ks
Fig 12 Ks
Fig 2
Fig 3
Fig 4
Fig 5
Fig 6
Fig 7
Fig 8
Fig 9
Fig 10
Fig 11
Fig 12
Plane
Quarter Clover (2)
Cover
Arrow
Basic 8
Basic 9
Basic 6
Basic 7
Basic 10
Fig 1.25
Straight Line link
Straight Line link.46
IntermediateA
IntA
Fig 1.48
Straight Line link.69
UnlimA
AdvA
Fig 13 K
Fig 14 K
Fig 15 K
Fig 16 K
Fig 13 Cat
Fig 14 Cat
Fig 15 Cat
Fig 16 Cat
Fig 16 Ks
Fig 15 Ks
Fig 14 Ks
Fig 13 Ks
Fig 13
Fig 14
Fig 15
Fig 16
POINT ROLL
Line
Apex_Angle
Arrows
Basic 13
Basic 11
Basic 12
2.8.x Alt.10
2.8.x Alt
Fig 1.71
Straight Line link.32
Fig 1.94
Straight Line link.59